TM-9-2920-225-34 HMMWV Generator Direct Support & General Support Maintenance Manual Download
Page 213 of 263
TM 9-2920-225-34 1. If shaft threads (1) are damaged, clean up threads with a die. cannot be fixed, generator is not repairable. 2. If runout of sliprings (2) is over 0.001 inch, send rotor (3) to to have sliprings turned. See figure 2-10. END OF TASK If threads machine shop TA 103692 TA 103693 Size and Fit Item of New Parts Wear Limits Number Item /Point of Measurement (inches) (inches) A Outside diameter of sliprings 1.635 to 1.620 1.580 Figure 2-10. Sliprings (Model 2184AC ) Wear Limits 2-197