TM-9-2920-225-34 HMMWV Generator Direct Support & General Support Maintenance Manual Download
Page 195 of 263
TM 9-2920-225-34 (2) Repair. 1. If runout of sliprings (1) is more than 0.001 inch, send rotor (2) to machine shop to have sliprings turned down. See figure 2-9. END OF TASK Size and Fit of New Parts Wear Limits Index Item/Point of Measurement (inches) (inches) Number A Outside diameter of sliprings 1.8430 to 1.8530 1.7500 Figure 2-9. Sliprings (Models 5504AA, 5504AB , and 5300GP) Allowable Wear Limits 2-179