TM-9-2920-225-34 HMMWV Generator Direct Support & General Support Maintenance Manual Download
Page 178 of 263
TM 9-2920-225-34 FRAME 2 I 1 1. 2. 3. 4. 5, NOTE If parts are damaged, get new ones. Check that brush holder (1) is not cracked or broken and that it does not have bent or loose studs. Check that brush springs (2) are not burned or overheated. If spring is overheated, get a new one. Check that leads on brushes (3) are not loose, broken or frayed. Measure distance A on brushes ( 3). Brush length must be at least 5/8 inch. Check brush levers (4) to see that they are not bent, broken or cracked. END OF TASK TA 103664 2-162