TM-9-2920-225-34 HMMWV Generator Direct Support & General Support Maintenance Manual Download
Page 175 of 263
TM 9-2920-225-34 1. Take out three screws (1) and take off bearing retainer (2). 2. Take out four screws (3). Take off brush holder (4) and bearing retainer (5). Have machine shop 2-8. 3. Using fabricated tool, drive housing (7) . GO TO FRAME 2 NOTE make fabricated tool. See figure bearing (6) from bore in slipring end TA 103660 I 2-159