TM-9-2920-225-34 HMMWV Generator Direct Support & General Support Maintenance Manual Download
Page 172 of 263
TM 9-2920-225-34 FRAME 3 1. Scribe a mark across slipring end housing (1) and stator shroud (2). 2. Straighten tabs on washers (3) and take out six screws (4), lockwashers (5), and tabbed washers. 3. Using soft-faced hammer, hit drive end of shaft (6) enough to fit puller on slipring end housing (1). 4. Pull off slipring end housing ( 1). END OF TASK TA 103659 2-156