TM-9-2920-225-34 HMMWV Generator Direct Support & General Support Maintenance Manual Download
Page 170 of 263
TM 9-2920-225-34 2-18. SLIPRING END HOUSING. TOOLS: No special tools required SUPPLIES: Cotter pin (4) PERSONNEL: One EQUIPMENT CONDITION: Generator removed from vehicle, pulley removed from generator. a. Preliminary Procedures. (1) Clean outside of generator before disassembly. Refer to para 1-3. (2) Remove fan and hub assembly. Refer to para 2-17. b. Removal. FRAME 1 1. Straighten tabs on two key washers (1). Take off two nuts (2), lockwashers (3), and two terminal leads (4). 2. Take off four brush leads (5) and two key washers (1). 3. Pull four brushes (6) out halfway in brush holder (7). Place four brush levers (8) so they hold brushes in the halfway position. IF WORKING ON MODEL 5504AA OR MODEL 5504AB , GO TO FRAME 2. IF WORKING ON MODEL 5500GP, GO TO FRAME 4 2-154