TM-9-2920-225-34 HMMWV Generator Direct Support & General Support Maintenance Manual Download
Page 149 of 263
TM 9-2920-225-34 2-16. HOUSING AND STATOR ASSEMBLY ● TOOLS: No special tools required SUPPLIES: Housing seal (2) Sealer compound, type II, MIL-S-45180 Tags PERSONNEL: One EQUIPMENT CONDITION : Generator removed from vehicle, pulley removed from generator. a. Preliminary Procedures. (1) Clean outside of generator before disassembly. Refer to para 1-3. (2) Remove end cover and regulator assembly. Refer to para 2-14. (3) Remove drive end bell and rotor assembly. Refer to para 2-15. b. Disassembly. 1. Tag all leads joined to stator terminal (1) so that they can be put back in the same place. 2. Take off three nuts (2) and take off capacitor panel ( 3). Take off three nuts (4), all leads, and flat washers ( 5). 3. Take off two nuts (6), lockwashers ( 7), and flat washers (8) that join stator terminal (1) to housing (9). Carefully lift stator from housing. GO TO FRAME 2 TA 103633 2-133