TM-9-2920-225-34 HMMWV Generator Direct Support & General Support Maintenance Manual Download
Page 146 of 263
TM 9-2920-225-34 FRAME 2 I 1. Put drive end bell (1) and rotor (2) assembly in housing and stator assembly (3) so that sliprings (4) go into pilot tool. 2. Push rotor (2) into place and push pilot tool out of housing and stator assembly ( 3). 3. Aline scribe marks and put in six screws and washers (5). 4. Fill cavity around shaft (6) in front of bearing retainer (7) with grease. GO TO FRAME 3 TA 103630 2-130