TM-9-2920-225-34 HMMWV Generator Direct Support & General Support Maintenance Manual Download
Page 140 of 263
TM 9-2920-225-34 c. Disassembly. 1. Take seal sleeve (1) and packing (2) off shaft of rotor (3). 2. Take out four screws (4) and take off bearing retainer (5) and preformed packing (6). Throw away packing. 3. Press seal (7) out of bearing retainer (5). 4. Pull drive end bell (8) from shaft of rotor (3). 5. Press bearing (9) and seal ( 10) out of drive end bell (8) through front of drive end bell. END OF TASK TA 103624 . 2-124