TM-9-2920-225-34 HMMWV Generator Direct Support & General Support Maintenance Manual Download
Page 134 of 263
TM 9-2920-225-34 Section V. LEECE-NEVILLE MODEL GENERATOR 3002AE 2-14. END COVER AND REGULATOR ASSEMBLY. TOOLS: No special tools required SUPPLIES: Housing preformed packing Artillery and automotive grease, type GAA, MIL-G-10924 Tags PERSONNEL: One EQUIPMENT CONDITION: Generator removed from vehicle, pulley removed from generator. a. Preliminary Procedure. Clean outside of generator before disassembly. Refer to para 1-3. b. Removal. 1. Take out six screws (1). CAUTION Be careful when lifting end cover (2) and regulator (3) assembly. Regulator leads (4) may be damaged and generator will not work correctly. 2. Lift end cover (2) and regulator (3) assembly clear of housing (5). 3. Tag five regulator leads (4) so that they can be put back in the same place. 4. Slip off five regulator leads (4) from terminal strip (6). 5. Take preformed packing (7) from groove in housing (5). Throw away packing. END OF TASK . 2-118