TM-9-2920-225-34 HMMWV Generator Direct Support & General Support Maintenance Manual Download
Page 101 of 263
TM 9-2920-225-34 FRAME 2 1. Take out six screws (1) and washer (2). NOTE When end bell (3) and rotor (4) assembly are taken out of housing (5), brushes will fall out of brush holders at slipring end of housing. Take out brushes. 2. Take end bell (3) and rotor (4) assembly out of housing (5). Tap lightly with a soft mallet if needed. END OF TASK 2-85