TM-9-2815-237-34 HMMWV Engine Direct Support & General Support Maintenance Manual Download
Page 16 of 272
2-1 TM 9-2815-237-34 CHAPTER 2 ENGINE MAINTENANCE Section I. REPAIR PARTS, SPECIAL TOOLS, TEST, MEASUREMENT, AND DIAGNOSTIC EQUIPMENT (TMDE), AND SUPPORT EQUIPMENT 2-1. COMMON TOOLS AND EQUIPMENT Refer to Modified Table of Organization and Equipment (MTOE) for authorized common tools and equipment applicable to your unit. 2-2. SPECIAL TOOLS AND SUPPORT EQUIPMENT Special tools and support equipment are listed in Appendix E of this manual and illustrated in TM 9-2815- 237-34P. 2-3. TEST, MEASUREMENT, AND DIAGNOSTIC EQUIPMENT (TMDE) Calibrate all measuring and test equipment used to determine equipment conformance in accordance with TB 43-180. 2-4. REPAIR PARTS Repair parts are listed and illustrated in TM 9-2815-237-34P. Section Il. SERVICE UPON RECEIPT 2-5. ENGINE INSPECTION a. Inspect for any damage done to engine during its removal from the vehicle. Refer to TM 9-2320-280-34 for engine removal procedure. b. Upon receipt of engine, ensure that all components are present and that no engine subassemblies have been removed. Refer to TM 9-2320-280-34 for engine dress after removal. c. If the engine has been transferred to you from another DS/GS maintenance facility, check the equip- ment against the packing slip to see if the shipment is complete. Report all discrepancies in accordance with the instructions of DA Pam 738-750.