TM-9-2815-237-34 HMMWV Engine Direct Support & General Support Maintenance Manual Download
Page 60 of 272
TM 9-2815-237-34 2-16. CYLINDER BLOCK REPAIR (Cont’d) WARNING Compressed air used for cleaning purposes will not exceed 30 psi (207 kPa). Use only with effective chip guarding and personal protective equipment (goggles/shield, gloves, etc.). d. Blow all dirt and cleaning solution from capscrew holes and oil passages with compressed air. e. Refer to para. 2-9 for additional cleaning instructions. f. Coat all cylinder bores, lifter bores, and machined surfaces with OE/HDO. g. Apply pipe sealing compound to six protective dust caps (3) and all plugs (4) and install in cylinder block (1). 2-41