TM-9-2815-237-34 HMMWV Engine Direct Support & General Support Maintenance Manual Download
Page 45 of 272
TM 9-2815-237-34 2-26 Change 1 2-15. ENGINE DISASSEMBLY INTO SUBASSEMBLIES (Cont’d) q. Fuel Injection Pump 1. Remove three capscrews (1) and pump driven gear (2) from fuel injection pump (5). 2. Remove idle return spring (7) from throttle lever (6). 3. Remove three nuts (8) and washers (9) from fuel injection pump (5) and timing gear cover (3). 4. Remove two capscrews (10) and accelerator cable bracket (11) from fuel injection pump (5). .WARNING. Gaskets installed on some 6.2L engines assembled prior to 1991 may contain asbestos. Gaskets should be removed with a scraper or putty knife and then be disposed of IAW current directives. Inhalation of asbestos fibers can cause respiratory ailments. 5. Remove the fuel injection pump (5) and gasket (4) from cover (3). Discard gasket (4).