TM-9-2815-237-34 HMMWV Engine Direct Support & General Support Maintenance Manual Download
Page 31 of 272
TM 9-2815-237-34 2-12.2 Change 1 2-15. ENGINE DISASSEMBLY INTO SUBASSEMBLIES (Cont’d) c.3. Manifold-to-Turbocharger Exhaust Pipe 1. Loosen clamp (5) and remove exhaust pipe (1) from exhaust manifold (4). Slide clamp (5) onto exhaust pipe (1). 2. Loosen clamp (2) and remove exhaust pipe (1) from turbocharger (3). Slide clamp (2) onto exhaust pipe (1). 3. Remove clamps (2) and (5) from exhaust pipe (1). 4. Repeat steps 1 through 3 for opposite side of engine. c.4. Turbocharger NOTE Center inlet manifold must be removed before removing turbocharger. 1. Remove two capscrews (5.2) and turbocharger (5.4) from engine block (5.5). 2. Remove turbocharger oil gasket (5.1) from engine block (5.5). Discard gasket (5.1). 3. Remove O-ring (5.3) from turbocharger (5.4) outlet. Discard O-ring (5.3).