TM-9-2815-237-34 HMMWV Engine Direct Support & General Support Maintenance Manual Download
Page 217 of 272
TM 9-2815-237-34 2-41. ENGINE ASSEMBLY FROM SUBASSEMBLIES (Cont’d) m. Water Pump and Adapter Plate 1. 2. 3. 4. 5. 6. CAUTION Ensure water pump P/N 23500085 is used on 6.5 L engines or damage to equipment will result. Install gasket (16) and water pump (15) on adapter plate (17) with seven capscrews (18). Tighten capscrews (18) to 13-20 lb-ft (18-27 N•m). Apply sealer to sealing surfaces on adapter plate (17), following diagram shown. Apply pipe sealing compound to capscrews (24) and (23). Install adapter plate (17) and water pump (15) on timing gear cover (3) with two long studs (25), short stud with thick hex (21), stud (22), and capscrew (24). Install two long capscrews (23), studs (19), four washers (20), and capscrews (26). Tighten studs (19) and capscrews (26) and (23) to 13-20 lb-ft (18-27 N•m). Tighten studs (21), (22), and (25), and capscrew (24) to 24-37 lb-ft (34-50 N•m). Install oil fill tube (29) on adapter plate (17) with two washers (28) and nuts (27). Tighten nuts (27) to 13-20 lb-ft (18-27 N•m). SEALER DIAGRAM 2-171