TM-9-2815-237-34 HMMWV Engine Direct Support & General Support Maintenance Manual Download
Page 213 of 272
TM 9-2815-237-34 2-41. ENGINE ASSEMBLY FROM SUBASSEMBLIES (Cont’d) i. Oil Filter and Adapter 1. Install two O-rings (15) on adapter bolt (13). 2. Install O-ring (18) on adapter (16). 3. Install adapter (16) on cylinder block (9) with adapter bolt (13) and gasket (14). Tighten adapter bolt (13) to 40 lb-ft (54 N•m). 4. Install oil filter (17) on adapter (16). Tighten oil filter (17) until gasket contacts adapter (16) and tighten an additional 1/2 to 3/4 turn. 5. Coat threads on fitting (22) with pipe sealing compound and install in cylinder block (9). 6. Coat threads on oil pressure sending unit (21) with pipe sealing compound and install in fitting (22). 7. Coat threads on cooler line adapters (19) and (20) with pipe sealing compound ad insall in cylinder. block (9). 2-167