TM-9-2815-237-34 HMMWV Engine Direct Support & General Support Maintenance Manual Download
Page 209 of 272
TM 9-2815-237-34 2-41. ENGINE ASSEMBLY FROM SUBASSEMBLIES (Cont’d) e. Camshaft 1. Rotate cylinder block (7) 180°. 2. Apply OE/HDO to all bearing journals (12) and cam lobes (11) on camshaft (13). CAUTION Support camshaft during installation to prevent damage to camshaft bearings. 3. Install camshaft (13) into cylinder block (7). NOTE Beveled edge of spacer must seat against front bearing journal on camshaft. 4. Install spacer (10) and camshaft thrust plate (9) with two capscrews (14). Tighten capscrews (14) to 18 lb-ft (24 N•m). 2-163