TM-9-2815-237-34 HMMWV Engine Direct Support & General Support Maintenance Manual Download

Page 198 of 272

d. Assembly TM 9-2815-237-34 2-40. FAN DRIVE REPAIR (Cont’d) 1. 2. 3. 4. 5. 6. 7. 8. NOTE For general assembly instructions, refer to para. 2-12. Install O-ring (4) in groove inside cylinder assembly (3). Install cylinder assembly (3) on housing (5). Install large O-ring (9) and small O-ring (8) on shaft assembly (13). Lubricate roller bearing (6) with lithium grease, Install shaft assembly (13) and spring (7) in housing (5). Install shaft assembly (13) on cylinder assembly (3) with tabwasher (2) and locknut (1). Tighten locknut (1) to 96 lb-in. (11 N•m). Install friction lining (12) in housing (5). Install three retaining plates (11) on housing (5) with six screws (10). Tighten screws (10) to 22 lb-in. (3 N•m), 2-152