TM-9-2815-237-34 HMMWV Engine Direct Support & General Support Maintenance Manual Download
Page 122 of 272
TM 9-2815-237-34 2-32. FUEL INJECTION PUMP REPAIR (Cont’d) 16. 17. 18. 19. 20. Install brace and rod into housing (2). Apply sealing compound to outside diameter of bushing (1). Install bushing (1), bushing guide, two washers, and nuts on rod. Tighten nuts housing (2). Repeat steps until bushing (1) is past flush with bushing boss (3) on housing (2). Remove tools from 12 through 19 for opposite bushing, if required. 2-101