TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 18 of 1555
10-2. FUEL FILLER HOUSING MAINTENANCE This task covers: a. Removal c. Installation b. Inspection a. Removal TM 9-2320-387-24-2 Change 1 10-3 INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Sealing compound (Appendix C, Item 72.1) Manual References TM 9-2320-387-10 TM 9-2320-387-24P Equipment Condition Fuel door open (M1114 only) (TM 9-2320-387-10). Maintenance Level Unit 4 3 5 2 1 6 4 7 ~ 8 9 10 11 M1114 1. Turn filler cap T-handle (1) and remove filler cap (2) from filler spout (6). NOTE M1114 vehicles are equipped with plusnuts instead of nuts and washers. 2. Remove three nuts (7), washers (4), capscrews (3), and washers (4) from filler housing (5) and filler spout (6). 3. Remove six screws (11) and washers (10) from fuel filler housing (5) and right outer wheelhouse panel (8). 4. Push filler cap (2) through filler housing (5) and remove filler housing (5). 5. Inspect six speednuts (9) for presence or damage. Replace if defective or missing.