TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 963 of 1555
TM 9-2320-387-24-2 25-84 Change 1 25-32. A/C COOLANT LINE COVERS MAINTENANCE This task covers: a. Removal c. Installation b. Inspection INITIAL SETUP: Applicable Models M1114 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Automotive maintenance and repair: field maintenance, basic (Appendix B, Item 6) Materials/Parts Sealing compound (Appendix C, Item 72.1) Manual References TM 9-2320-387-24P Equipment Condition • Left passenger seat removed (para. 10-45). • Driver’s seat assembly removed (para. 10-40). Maintenance Level Direct support 1. Remove four capscrews (5) and washers (6) from A/C coolant line front cover (7) at left side tunnel (1). 2. Remove two capscrews (4) and washers (3) from mounting angle (2) at left side tunnel (1). 3. Remove A/C coolant line front cover (7) with mounting angle (2) from left side tunnel (1). 4. Remove two screws (8), washers (9), and mounting angle (2) from A/C coolant line front cover (7). 5. Remove four capscrews (20), washers (21), and A/C coolant line rear B-pillar cover (22) from left side tunnel (1). 6. Remove three capscrews (18), washers (19), and left rear HVAC lines cover (17) from left side rear tunnel (1). 7. Remove two screws (14), washers (15), and left rear HVAC lines cover (11) from left rear wheelhouse (12). Refer to para. 10-56 for plusnuts (10), (13), and (16) inspection and replacement. b. Inspection a. Removal