TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 949 of 1555
TM 9-2320-387-24-2 I I 2527. A C EVAPORATOR ASSEMBLY (REAR) MAINTENANCE This task covers: a. Disassembly INITIAL SETUP: b. Assembly Applicable Models Ml114 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Manual References TM 9-2320-387-24P EquipmentCondition A/C evaporator assembly (rear) removed (para. 25-22). Maintenance Level Direct support a. Disassembly 1. Remove three screws (7) and drain pan (10) from AK! evaporator (11). 2. Remove insulation packing (8) from thermostat (9). 3. Remove insulation (6) from rear A/C evaporator cover (4). 4. Remove ten screws (5) and rear A/C evaporator cover (4) from front A/C evaporator cover (12). 5. Remove six screws (i31, grille (14), and front A/C evaporator cover (12) from A/C evaporator (11). 6. Remove four screws (31, washers (21, and fan assembly (1) from front A/C evaporator cover (12). 1. Install fan assembly (1) on front A/C evaporator cover (12) with four washers (2) and screws (3). 2. Install grille (14) and front A/C evaporator cover (12) on A/C evaporator (11) with six screws (13). 3. Install rear A/C evaporator cover (4) on front A/C evaporator cover (12) with ten screws (5). 4. Install insulation (6) on rear NC evaporator cover (4). 5. Install insulation packing (8) on thermostat (9). 6. Install drain pan (10) on evaporator (11) with three screws (7). 25-72