TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 94 of 1555
10-46. THREE POINT SEATBELT BRACKETS REPLACEMENT This task covers: a. Removal b. Installation NOTE Replacement procedures for left and right seatbelt brackets are basically the same. This procedure covers the left seatbelt bracket. NOTE Perform step 1 for M1113 models only. 1. Remove four capscrews (3), washers (2), and upper bracket (1) from B-pillar (4). 2. Remove four capscrews (6), washers (5), and lower bracket (7) from B-pillar (4). 1. Install lower bracket (7) on B-pillar (4) with four washers (5) and capscrews (6). Tighten capscrews (6) to 15-21 lb-ft (20-28 N • m). NOTE Perform step 2 for M1113 models only. 2. Install upper bracket (1) on B-pillar (4) with four washers (2) and capscrews (3). Tighten capscrews (3) to 15-21 lb-ft (20-28 N • m). b. Installation a. Removal INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Manual References TM 9-2320-387-24P Equipment Condition Three point seatbelt removed (para. 10-47). Maintenance Level Unit TM 9-2320-387-24-2 Change 1 10-77 FOLLOW-ON TASK: Install three point seatbelt (para. 10-47). 1 2 5 7 6 4 3