Sign up to sell your inventory with NSN Lookup

TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download

Page 904 of 1555

25-13.3. RIGHT FRONT UNDERBODY ARMOR INSTALLATION (Cont’d) TM 9-2320-387-24-2 25-36.28 Change 1 8. From inside vehicle, match-drill fourteen 13/32-in. (10.3-mm) diameter holes from passenger side footwell outer armor (3) and A-pillar armor (4) through right front underbody armor (1). 9. Install three capscrews (7) and locknuts (5) through passenger side footwell outer armor (3), A-pillar armor (4), and right front underbody armor (1). Tighten locknuts (5) to 35 lb-ft (47 N•m). 10. Match-drill twelve 13/32-in. (10.3-mm) diameter holes from passenger side footwell inner armor (2) into right front underbody armor (1). Stop drilling when drill bit penetrates hat section (6). Do not drill completely through right front underbody armor (1). MATCH-DRILL 13/32-IN. (10.3-MM) DIAMETER HOLES (14 PLACES) MATCH-DRILL 13/32-IN. (10.3-MM) DIAMETER HOLES(12 PLACES) ROTATED 90 DEGREES 3 1 2 4 5 ~ 1 6 7 4