TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 898 of 1555
25-13.3. RIGHT FRONT UNDERBODY ARMOR INSTALLATION (Cont’d) TM 9-2320-387-24-2 25-36.22 Change 1 1. Install passenger side footwell outer armor (2) and spacer (6) on right A-beam armor (3) with capscrew (1). Do not tighten capscrew (1). 2. Install spacer (4) and four capscrews (5) on A-beam armor (3). Tighten capscrews (1) and (5) to 35 lb-ft (47 N • m). 3. Using A-pillar armor (7) as a template, match-drill twenty-four 13/32-in. (10.3-mm) diameter holes from A-pillar armor (7) through passenger side footwell outer armor (2). NOTE Capscrews in step 4 are installed in darkened hole locations in A-pillar armor. 4. Install ten capscrews (9) and locknuts (8) through A-pillar armor (7) and passenger side footwell outer armor (2). Tighten locknuts (8) to 35 lb-ft (47 N • m). b. New Passenger Side Footwell Outer Armor Installation