TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 897 of 1555
25-13.3. RIGHT FRONT UNDERBODY ARMOR INSTALLATION (Cont’d) TM 9-2320-387-24-2 Change 1 25-36.21 NOTE Step a. is performed to temporarily install a new right front underbody armor segment in order to perform match-drilling and provide a secure interface with other vehicle body armor brackets and liners prior to final installation. 1. Install passenger side footwell upper armor (6) on A-pillar cowl (4) with two capscrews (3), four washers (2), and two nuts (5). Tighten nuts (5) to 10 lb-ft (14 N • m). 2. Using lower right deflector (7) as a template, match-drill three 13/32-in. (10.3-mm) diameter holes from lower right deflector (7) through passenger side footwell upper armor (6). a. New Passenger Side Footwell Upper Armor Installation ~ ~ 1 6 2 5 2 3 4 7 MATCH-DRILL 13/32-IN. (10.3-MM) DIAMETER HOLES (3 PLACES)