Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download

Page 896 of 1555

25-13.3. RIGHT FRONT UNDERBODY ARMOR INSTALLATION TM 9-2320-387-24-2 25-36.20 Change 1 INITIAL SETUP: Applicable Models M1114 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Four flatwashers (Appendix G, Item 51.1) Two capscrews (Appendix G, Item 20.1) Twelve AVK fasteners (Appendix G, Item 3.1) Sixty-two locknuts (Appendix G, Item 169) Two nuts (Appendix G, Item 243.1) Sealing compound (Appendix C, Item 72.1) Personnel Required One mechanic One assistant Manual References TM 9-2320-387-10 TM 9-2320-387-24P Equipment Condition • Air cleaner removed (para. 3-12). • Engine access cover removed (para. 10-22). • Air distribution duct removed (para. 11-81). • Tunnel insulation removed (para. 10-33). • Right front underbody armor removed (para. 11-38). • Passenger side footwell outer armor removed (para. 25-28). • Passenger side footwell inner armor removed (para. 25-30). • Passenger side upper cowl liner removed (para. 25-36). General Safety Instructions Right front underbody armor is extreemly. and must be supported during removal and installation. Maintenance Level Direct Support This task covers: a. New Passenger Side Footwell c. New Passenger Side Footwell Upper Armor Installation Inner Armor and Inner/Outer b. New Passenger Side Footwell Cowl Reinforcement Installation Outer Armor Installation d. New Right Front Underbody Armor Installation WARNING Right front underbody armor is extremely heavy and must be supported during removal and installation. Failure to do so may result in injury to personnel or damage to equipment. NOTE Installing a new right front underbody requires match-drilling of the underbody to the vehicle. In addition, the passenger side footwell upper armor, passenger side footwell outer armor, passenger side footwell inner armor, and passenger side inner/outer cowl reinforcement will have to be replaced.