Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download

Page 890 of 1555

TM 9-2320-387-24-2 25-36.14 Change 1 25-13.2. 10,500 LB HYDRAULIC WINCH REPAIR (Cont'd) 12. Apply grease to ring gear thrust bushing (7) and install into gear box/drum support (9). 13. Apply hydraulic fluid to O-ring (8) and install into gear box/drum support (9). 14. Apply grease to drum drive bushing (5). Install drum drive bushing (5) onto planetary gear end (10) of drum assembly (4). 15. Apply grease to gear teeth and machined surfaces of ring gear (6). Install ring gear (6) onto planetary gear end (10) of drum assembly (4) with wider machined edge of ring gear (6) towards drum assembly (4). NOTE Make sure high lever and low lever are both in the FREE position. 16. Install drum assembly (4) into gear box/drum support (9). 17. Apply grease to drum bushing (2). Align tab on drum bushing (2) with slot on motor end/drum support (3) and install into motor end/drum support (3). 18. Apply hydraulic fluid to O-ring (1) and install into motor end/drum support (3). 19. Install motor end/drum support (3) onto drum assembly (4).