TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 864 of 1555
WARNING C-pillar partition is extremely heavy and must be supported during removal and installation. Failure to do so may result in serious injury to personnel or damage to equipment. NOTE • These procedures cover replacement of left side mounting hardware for the C-pillar partition. Right side is basically the same. • Note location of capscrews for installation. 1. Remove four capscrews (2) and C-pillar gap bracket (3) from wheelwell (1). 2. Remove two capscrews (12) and washers (11) securing C-pillar partition stop bracket (9) to vehicle floor (10). 3. Remove eight capscrews (7) securing two C-pillar parition isolator brackets (6) to vehicle wheelwells (1). 4. Remove shims (5) and C-pillar partition (4) from vehicle. NOTE Note locations of capscrews for installation. 1. Remove locknut (8), capscrew (13), washer (14), and C-pillar partition stop bracket (9) from C-pillar partition (4). Discard locknut (8). b. Disassembly a. Removal TM 9-2320-387-24-2 25-24 Change 1 25-9. C-PILLAR PARTITION MAINTENANCE This task covers: a. Removal c. Assembly b. Disassembly d. Installation b.1. Inspection INITIAL SETUP: Applicable Models M1114 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Automotive maintenance and repair: field maintenance, basic (Appendix B, Item 6) Materials/Parts Nine locknuts (Appendix G, Item 168) Sealing compound (Appendix C, Item 72.1) Manual References TM 9-2320-387-24P Equipment Condition • Cargo shell door removed (para. 11-14). • Passenger seats removed (para. 10-45). • Rear A/C evaporator removed (para. 25-22). • Cargo shells removed (para. 25-7). General Safety Instructions C-pillar partition is extremely heavy and must be supported during removal and installation. Maintenance Level Direct support