TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download

Page 858 of 1555

6. Remove two nuts (1) and washers (2) from stud (7) in turret support ring (9). 7. Remove sleeve spacer (8), two resilient mounts (3), plates (4), stud (7), and shim(s) (5), if present, from between turret support ring (9) and C-pillar support mount (6). 8. Remove nut (20) and washer (21) from stud (22) on right cargo shell mount (14). 9. Remove stud (22), sleeve spacer (23), two resilient mounts (13), plates (12), and bracket (11) from roof mount (10) and C-pillar support mount (14). 10. Remove socket-head screw (17) and cargo tiedown (18) from cargo shell support tube (25) and wheelwell (19). 11. Remove capscrew (16) and washer (15) from wheelwell (19) and support tube (25). CAUTION Do not lift cargo shell farther than limits specified in step 12. Raising cargo shell too far may cause damage to C-pillar. 12. Raise cargo shell (26) approximately 1 in. (2.5 cm) and, using a mallet, rap cargo shell support tube (25) at point A to loosen cargo shell (26), taking care not to bend C-pillar (24). Remove cargo shell (26) from wheelwell (19). 13. Remove cargo shell seal (27) and inspect for damage. Replace if damaged. 14. Remove adhesive tape from cargo shell (26). Discard tape. TM 9-2320-387-24-2 25-18 Change 1 25-7. CARGO SHELL MAINTENANCE (Cont'd) 1 2 2 8 9 10 24 17 18 20 21 22 12 13 23 16 25 12 13 11 14 15 19 7 1 6 4 3 3 4 5 A