TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 85 of 1555
TM 9-2320-387-24-2 Change 1 10-69 10-40. DRIVER'S SEAT ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation Manual References TM 9-2320-387-24P Maintenance Level Unit M1113 M1114 INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Four lockwashers (Appendix G, Item 206) Tape (Appendix C, Item 78) 1 2 3 4 5 6 7 6 7 2 3 5 1 1. Spread cover (7) to allow access to socket-head screws (2). NOTE Perform step 2 for M1113 models only. Perform step 3 for M1114 models only. 2. Remove four socket-head screws (2), lockwashers (3), cover (7), seat assembly (1), tape (4), and four washers (5) from supports (6). Discard lockwashers (3). 3. Remove four socket-head screws (2), lockwashers (3), washers (5), cover (7), and seat assembly (1) from supports (6). Discard lockwashers (3). NOTE Perform step 1 for M1113 models only. Perform step 2 for M1114 models only. 1. Install four washers (5), tape (4), cover (7), and seat assembly (1) on supports (6) with four lock- washers (3) and socket-head screws (2). 2. Install seat assembly (1) on supports (6) with four washers (5), lockwashers (3), and socket-head screws (2). Tighten socket-head screws (2) to 140-170 lb-in. (15-19 N•m). b. Installation a. Removal