TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 848 of 1555
INITIAL SETUP: Applicable Models M1114 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Automotive maintenance and repair: field maintenance, basic (Appendix B, Item 6) Materials/Parts Sealing compound (Appendix C, Item 63) Manual References TM 9-2320-387-24P TM 9-2320-387-24-2 25-8 Change 1 25-5. HEADER MAINTENANCE This task covers: a. Removal c. Installation b. Inspection Equipment Condition Roof panel removed (para. 25-3). Maintenance Level Direct support NOTE Replacement procedures for left and right side headers are basically the same. This procedure is for left side header. 1. Remove two capscrews (1) and block (8) from header (2) and C-pillar (9). 2. Remove two capscrews (5) and header (2) from windshield interior armor (4). 1. Inspect seals (3), (6), and (7) for damage. If damaged, replace. 2. Refer to para. 10-56 for plusnut inspection and replacement. NOTE Apply sealing compound to threads of capscrews prior to installation. 1. Install header (2) on windshield interior armor (4) with two capscrews (5). 2. Align header (2) and tighten capscrews (5) to 10 lb-ft (14 N•m). 3. Install header (2) on C-pillar (9) with block (8) and two capscrews (1). Tighten capscrews (1) to 68-82 lb-in. (8-9 N• m). c. Installation b. Inspection a. Removal