TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 838 of 1555
TM 9-2320-387-24-2 24-21. REAR CROSSMEMBER BRACKET AND REAR BODY MOUNT BRACKET REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Four locknuts (Appendix G, Item 121) Equipment Condition Rear body mount removed (para. 33-3). Maintenance Level Direct support Manual References TM 9-2320-387-24P 1 a. Removal 1 . 1. Remove four locknuts (11, washers (2), rear body mount bracket (31, and plate (4) from frame rail (5). Discard locknuts (1). 2. Remove four capscrews (81, washers (2), crossmember bracket (71, and plate (6) from frame rail (5). b. Installation 1. Install plate (6) and crossmember bracket (7) on frame rail (5) with four washers (2) and capscrews (8). 2. Install plate (41 and rear body mount bracket (3) on frame rail (5) with four washers (2) and locknuts ( 1). 3. Install rear body mount (para. 33-3). 4. Tighten locknuts (1) to 90 lb-R (122 Nom). 24-38