TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 826 of 1555
TM 9-2320-387-24-2 24-17. FRONT SUSPENSION REAR CROSSMEMBER REPLACEMENT This taskcovers: a. Removal b. Installation INITIAL SETUP: General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Three lockwashers (Appendix G, Item 193) Thirteen locknuts (Appendix G, Item 164) Sealing compound (Appendix C, Item 69) Manual References TM 9-2320-387-24P Equipment Condition l Radiator removed (para. 3-62). l Right front upper control arm removed (para. 6-25). l Lower radiator tube removed (para. 3-71). l Right front caliper-to-tee brake line removed (para. 7-7). l Lower control arms removed (para. 6-26). l Differential removed (para. 21-5). l Differential support brackets and side mounting brackets removed (para. 24-W. MaintenanceLevel Direct support 1. 2. 3. 4. 5. 6. 7. 8. Remove three capscrews (41, lockwashers (31, and washers (2) and pull steering gear (1) away from left frame rail (5). Discard lockwashers (3). Remove three capscrews (12) and vent line clamps (11) from rear crossmember (17). NOTE Note direction of capscrews for installation. Remove four locknuts (151, washers (161, capscrews (191, washers (161, and vent line bracket (20) from rear crossmember (17) and right frame rail (10). Discard locknuts (15). Remove three locknuts (9), washers (7), capscrews (81, washers (71, and vent line bracket (6) from crossmember (17) and frame rail (5). Discard locknuts (9). Remove capscrew (21) and washer (22) from rear crossmember (17) and frame rail (5). Remove six locknuts (181, washers (14), capscrews (131, and washers (14) from rear crossmember (17) and left and right rear crossmember mounting brackets (23). Discard locknuts (18). Slide rear crossmember (17) and left and right crossmember mounting brackets (23) down and out from under vehicle. Remove left and right crossmember mounting brackets (23) from rear crossmember (17). 24-26