TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 820 of 1555
24-15. DIFFERENTIAL SUPPORT BRACKET AND SIDE MOUNTING BRACKET REPLACEMENT INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts O-ring seal (Appendix G, Item 284) Four locknuts (Appendix G, Item 121) Locknut (Appendix G, Item 161) Sealing compound (Appendix C, Item 63) Manual References TM 9-2320-387-24P Equipment Condition Service brake rotor removed (para. 7-12). Maintenence Level Direct support This task covers: a. Removal b. Installation 1. Remove locknut (5), O-ring seal (4), and output flange (3) from output shaft (2). Discard O-ring (4) and locknut (5). 2. Remove two capscrews (7) and brake adapter (6) from differential (1). 3. Remove two capscrews (12) and washers (13) from differential side mounting bracket (14) and differential (1). 4. Remove two locknuts (11), washers (8), capscrews (9), washers (8), and differential support bracket (10) with side mounting bracket (14) from suspension crossmember (15). Discard locknuts (11). NOTE Scribe a locating mark on differential support bracket and side mounting bracket for installation. 5. Remove two locknuts (16), washers (17), capscrews (19), washers (17), mounting plate (18), and side mounting bracket (14) from support bracket (10). Discard locknuts (16). a. Removal TM 9-2320-387-24-2 24-20 Change 1 2 3 4 5 6 7 1