TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 810 of 1555
TM 9-2320-387-24-2 24-9. RIGHT ENGINE MOUkT BRACKET REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: TOOIS General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Five locknuts (Appendix G, Item 121) Manual References TM 9-2320-387-24P Equipment Condition Engine right mount and insulator removed (para. 15-3). Maintenance Level Direct support 1. Remove two locknuts (lo), washers Cl), capscrews (21, and washers (1) from support bracket (8) and engine mount bracket (5). Discard locknuts (10). 2. Remove capscrew (3) and vent tube clamp (4) from engine mount bracket (5). 3. Remove three locknuts (91, washers (7), capscrews (61, washers (71, support bracket W, and engine mount bracket (5) from frame rail (11). Discard locknuts (9). -1 1. Install support bracket (8) and engine mount bracket (5) on frame rail (11) with three washers (71, capscrews (61, washers (71, and locknuts (9). 2. Secure support bracket (8) on engine mount bracket (5) with two washers Cl), capscrews (21, washers (11, and locknuts (10). Tighten locknuts (10) and (9) to 90 lb-t% (122 N-m). 3. Install vent tube clamp (4) on engine mount bracket (5) with capscrew (3). 24-10