TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 80 of 1555
10-37. PIONEER TOOL KIT STOWAGE STRAP AND BRACKET MAINTENANCE This task covers: a. Removal c. Installation b. Inspection Materials/Parts Sealing compound (Appendix C, Item 72.1) Manual References TM 9-2320-387-24P Maintenance Level Unit TM 9-2320-387-24-2 10-64 Change 1 NOTE The replacement procedure for all stowage straps on tailgate is basically the same. This procedure covers one strap. 1. Remove strap (3) from loop (5). 2. Remove four screws (1) and holder (2) from tailgate (6). 3. Remove four screws (4), two loops (5), and strap (3) from tailgate (6). NOTE For inspection and removal of insertnuts, refer to para. 10-56. Inspect insertnuts (7). Replace if damaged. 1. Apply sealing compound to threads of four screws (4), and install two loops (5) and strap (3) on tailgate (6) with screws (4). Tighten screws (4) to 20 lb-in. (2 N•m). 2. Apply sealing compound to threads of four screws (1), and install holder (2) on tailgate (6) with screws (1). Tighten screws (1) to 32-41 lb-in. (4-5 N•m). 3. Install strap (3) on loop (5). c. Installation b. Inspection a. Removal 1 2 3 5 4 4 5 ~ 6 7 INITIAL SETUP: Applicable Models M1114 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2)