TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 796 of 1555
TM 9-2320-387-24-2 23-3. POWER STEERING PUMP REPAIR This task covers: a. Disassembly b. Cleaning c. Inspection d. Assembly INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Seal service kit (Appendix G Item 403) Equipment Condition Power steering pump removed (para. 8-23). Maintenance Level Direct support Manual References TM 9-2320-387-24P a. Disassembly 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. NOTE Have drainage container ready to catch fluid. Remove reservoir filler cap (1) and drain fluid from pump assembly (7). Remove two mounting studs (2) from pump assembly (7). NOTE Fitting assembly is spring-loaded. Remove carefully to avoid losing parts. Remove fitting assembly (6) and O-ring seal (5) from pump assembly (7). Discard O-ring seal (5). Remove flow control valve (4) and valve spring (3) from pump assembly (7). CAUTION Do not overtighten vise as pump body could be distorted. Place pump assembly (7) in vise so pump shaft (10) is pointing down. Tap lightly around edge of reservoir (8). Remove reservoir (8) and O-ring seal (9) from pump body (11). Discard O-ring seal (9). Remove two O-ring seals (14) from pump body (11). Discard O-ring seals (14). Remove magnet (13) from pump body (11). Discard magnet (13). Remove O-ring seal (12) from pump body (11). Discard O-ring seal (12). , 23-2