TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 781 of 1555
TM 9-2320-387-24-2 21-7. CONTROL ARM BUSHING REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Grease (Appendix C, Item 34) Personnel Required One mechanic One assistant Manual References TM 9-2320-387-24P, Equipment Condition Control arm removed (para. 6-25 or 6-26). Maintenance Level Direct support NOTE Control arm bushings must be replaced as a set. [ a. Removal 1 Support control arm (1) and press bushing (21 out of control arm (1). b. Installation 1. 2. 3. Lubricate O.D. of bushing (2) with grease. Insert bushing (2) in control arm (1). Support control arm (1) and press bushing (2) into control arm (1) until flange (3) on bushing (2) seats on control arm (1). FOLLOW-ON TASK: Install control arm (para. 6-25 or 6-26). 21-18