TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 780 of 1555
TM9-2320-387-24-2 21-6. GEARED HUB REPAIR (Cont’d) NOTE Immediately install steering arm cover after application of sealer. 17. 18. 19. 20. Apply sealing compound to seal (17) and install seal (17) on steering arm cover (16) with retaining ring (18). Install steering arm cover (16) on geared hub (7) with four washers (15) and capscrews (141. Tighten capscrews (14) to 65 lb-ft (88 N-ml. Apply anaerobic sealer to side cover (22) mating surface and position side cover (22) on geared hub (7). Apply sealing compound to capscrews (20) and install side cover (22) on geared hub (7) with eight washers (21) and capscrews (201. Tighten capscrews (20) to 8-13 lb-ft (11-18 Neml. 0 16 FOLLOW-ON TASKS: Install geared hub (para. 6-9). 21-17