TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 776 of 1555
TM9-2320-387-24-2 21-6. GEARED HUB REPAIR (Cont’d) NOTE A new spindle extension is required if replacing spindle or if extension is damaged. Apply adhesive sealant on extension prior to pressing it into spindle. 3. Inspect spindle (14) and spindle extension (15) for damage and rough or corroded sealing surface (16). Replace spindle (141 and extension (151 if damaged or if sealing surface (16) is rough or corroded. 4. Inspect geared hub (8) and all threaded holes for damage. Repair any damaged holes using thread repair inserts. Replace geared hub assembly if geared hub (8) is damaged. 5. Remove plug (17) from steering arm cover (18). Inspect steering arm cover (18) and threaded hole. Replace steering arm cover (181 if damaged. 6. Inspect drive gear retainer (3). Replace if damaged. 6 9 21-13