TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 773 of 1555
TM 9-2320-387-24-2 [ 21-6. GEARED HUB REPAIR 1 This task covers: a. Disassembly b. Cleaning c. Inspection d. Assembly INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Dial indicator (Appendix B, Item 113) Blind hole puller set (Appendix B, Item 112) (Optional) Special Tools Input seal installer (Appendix B, Item 107) Spindle seal installer (Appendix B, Item 109) Driver handle (Appendix B, Item 60) hIaterials/Parts Input seal (Appendix G, Item 405) Seal (Appendix G, Item 425) Lockwasher (Appendix G, Item 218) Materials/Parts (Cont’d) Anaerobic gasket sealing compound (Appendix C, Item 58) Sealing compound (Appendix C, Item 711 Sealing compound (Appendix C, Item 64) Sealing compound (Appendix C, Item 62) Grease (Appendix C, Item 33) Manual References TM 9-2320-387-24P Equipment Condition Geared hub removed (para. 6-9). hlaintenance Level Direct support 1. Position geared hub (4) with spindle (5) supporting geared hub (4). 2. Remove eight capscrews (11, washers (2), and side cover (31 from geared hub (4). 21-10