TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 748 of 1555
TM9-2320-387-24-2 19-d. TRANSMISSION/TRANSFER CASE ASSEMBLY INSTALLATION (Cont’d) NOTE Nuts on mount must be loosened prior to installation of crossmember on vehicle for proper alignment. 6. Loosen two nuts (22) on mount (20) and crossmember (25). 7. Install mount (20) and crossmember (25) on transmission adapter (15) with two lockwashers (24) and capscrews (23). Tighten capscrews (23) to 65 lb-R (88 N-m). 8. Install stud (111, nut (12), washer (13), cable (14), washer (131, and nut (12) on support bracket (10). Secure crossmember (25) on stud (11) with washer (27) and locknut (26). 9. Install bypass valve (16) and crossmember(25) on support bracket (19) with washer (181, capscrew (171, washer (181,and locknut (21). Tighten locknut (21) to 65 lb-ft (88 Nom). 10. Tighten two nuts (22) to 65 lb-f% (88 Nom).