TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download

Page 74 of 1555

TM 9-2320-387-24-2 10-32. RIGHT FRONT COWL INSULATION REPLACEMENT I This taskcovers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Four locknuts (Appendix G, Item 109) Manual References TM S-2320-387-24P Maintenance Level Unit Personnel Required One mechanic One assistant NOTE Ml114 model insulation has no floor mounting hardware. The following procedure applies to Ml113 models. va.Removal) Remove four locknuts (61, washers (51, capscrews (21, retainer (11, and insulation (4) from floor (7). Discard locknuts (6). b. Installation 1. Install insulation (4) and retainer (1) on floor (7) with four capscrews (21, washers (51, and locknuts (6). Tighten locknuts (6) to 6 lb-ft (8 N-m). 2. Press insulation (4) into place on cowl (3). lo-58