TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 730 of 1555
TM 9-2320-387-24-2 18-6. ENGINE WIRING HARNESS REPLACEMENT (Cont’d) 10. Disconnect leads 569A (9) and 569B (10) from cold-advance switch (13). 11. Disconnect four harness leads (11) from glow plugs (12). 12. Remove three capscrews (61, lockwashers (71, clamps (81, and harness (4) from heat shield (5). Discard lockwashers (7). 13. Remove two screws (31, clamps (21, and harness (4) from bracket (1). 18-36