Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download

Page 715 of 1555

TM 9-2320-387-24-2 18-4. STARTER REPAIR (Cont’d) 8. Apply aircraft grease to armature shaft (321, shift lever studs (26), and the inside diameter of pinion housing end plate seal (34). 9. Install washer (331, pinion housing end plate (361, gasket (37), and washer (30) on armature shaft (32). 10. Install clutch (29) on armature shaft (32) with pinion stop (28) and snapring (27). NOTE Armature and shift lever must be positioned as shown for installation into pinion housing. 11. Install pinion shift lever (25) and armature (31) on pinion housing (38). Install pinion housing end plate (36) on pinion housing (38) with three screws (35). Tighten screws (35) to 40 lb-in. (5 N-m). 12. Install pin (241 on pinion shift lever (25) and pinion housing (38) and install two plugs (23) on pinion housing (38). 18-21