TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 707 of 1555
TM9-2320-387-24-2 18-4. STARTER REPAIR (Cont’d) 3. Remove four nuts (6), lockwashers (7), and two solenoid lead connectors (8) from field and armature terminals on starter motor frame (9) and solenoid (11). Discard lockwashers (7). 4. Remove four capscrews (10) and solenoid (11) from starter motor frame (9). 5. Scribe a locating mark (12) on commutator end frame (16) and starter motor frame (9). 6. Remove four capscrews (15), commutator end frame (16), and gasket (17) from starter motor frame (9). Discard gasket (17). NOTE Measure and note combined thickness of thrust washer(s) and spacer for installation. 7. Remove thrust washer(s) (14) and spacer (13) from armature shaft (19). Discard spacer (13) and thrust washer(s) (14). 8. Remove oil felt washer (18) from commutator end frame (16). Discard felt washer (18). 18-l 3