TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 693 of 1555
18-3. 200-AMPERE DUAL VOLTAGE ALTERNATOR TESTING AND REPAIR (Cont'd) 17. Apply silicone compound to studs on core and shaft assembly (5). 18. Install core and shaft assembly (5) on rear rotor (24) with six locknuts (25). Tighten locknuts (25) to 45 lb-in. (5 N•m). NOTE Align scribe marks on end housing and stator shell. 19. Install end housing (9) on core and shaft assembly (5) and rear bearing (6). Tap lightly with a soft- faced mallet. 20. Apply silicone compound to studs on stator shell (15). 21. Install end housing (9) on stator shell (15) with nine locknuts (14). Tighten locknuts (14) to 18 lb-in. (2 N•m). 22. Install cover plate (20) on front housing (1) with three lockwashers (22) and screws (21). 23. Install bearing bushing (10) on core and shaft assembly (5). 24. Install fan (11) on core and shaft assembly (5) with washer (12) and locknut (13). Tighten locknut (13) to 50 lb-ft (68 N•m). TM 9-2320-387-24-2 FOLLOW ON TASK: Install alternator (para. 4-5) Change 1 18-10.1 24 25 9 10 11 12 13 14 23 21 22 20 19 18 1 5 6 17 16 15