TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 2 Download
Page 653 of 1555
TM 9-2320-387-24-2 1 1528. ENGINE INSTALLATION (Cont’d) I 107. 108. 109. 110. 111. 112. 113. 114. Install left splash shield (29) on bracket (40) with washer (381, capscrew (391, washer (521, and locknut (53). Install harness and clamp (55) on splash shield (29) with screw (56) and nut and lockwasher assembly (54). Install splash shield (29) on master cylinder bracket (30) with washer (31), capscrew (321, washer (281, and locknut (27). NOTE Perform steps 110 and 111 for Ml113 models only. Install left splash shield (29) on airlift bracket (24) with lo&washer (351,washer (371, and capscrew (36). Tighten capscrew (36) to 15 lb-R (20 Nom). Install left splash shield (29) on airlift bracket (24) with washer (331, capscrew (341, two washers (261, and locknut (25). Tighten capscrew (34) to 95-145 lb-in. (11-16 N-m). Install connector (57) on plate (44) with four screws (58) and nuts (59). Install plate (44) and spring nuts (48) and (47) on headlight housing (49) with washer (46) and hex-head screws (45) and (50). Install plate (44) on splash shield bracket (51) with four lockwashers (431, washers (411, and capscreivs (42). 15-121